A hot-swap keyboard has sockets on the PCB that grip the switch pins, so you can pull switches out and push new ones in without soldering. On a soldered keyboard, changing a switch means melting the solder to remove it. Even on a hot-swap board, checking 3-pin or 5-pin compatibility and the condition of the pins keeps the swap safe.
How is a hot-swap keyboard different from a soldered one?
According to Corsair’s hot-swap explainer, a hot-swap PCB has holes in the same places as a standard board, but each hole holds a small socket that grips the switch pins. On a standard board the holes do not grip the pins, so solder is needed to connect and hold the switches.
The same article explains that desoldering takes time and that breaking switches or damaging the board is not uncommon. It adds that hot-swap boards can cost more because the PCB is more complex to make.
3-pin or 5-pin: will it fit your keyboard?
Glorious’s hot-swap guide describes a 3-pin switch as two metal legs and one plastic center post, and a 5-pin switch as adding two more plastic pins for extra alignment stability in the socket. The number of metal legs is the same.
| Combination | Does it work? | Also check |
|---|---|---|
| 3-pin switch in a 5-pin board | Generally works as is | Whether it feels wobbly |
| 5-pin switch in a 5-pin board | Works as is | The board’s hole count |
| 5-pin switch in a 3-pin board | The two plastic pins must be clipped | Not reversible; warranty terms |
| Switches of another standard | Not guaranteed | The maker’s supported list |
KeebsForAll’s switch installation guide explains that you can check by counting holes: 5-pin compatible boards have five per switch, 3-pin boards have three. Low-profile or optical switches can follow separate standards, so check the product’s supported list first.
Steps for swapping a switch
Combining the flow from Glorious and KeebsForAll:
- Turn off the keyboard and unplug the cable.
- Lift the keycap straight up with a keycap puller, without twisting.
- Hook the switch puller into the notches on the top and bottom of the switch, squeeze gently, and pull straight up.
- Check that the new switch’s metal pins are straight.
- Line up the orientation, set the pins on the holes, and press evenly until it seats.
- Put the keycap back and press it several times to confirm it registers.
Swapping a few switches first and confirming they work before doing the rest makes problems easier to find.
What to watch out for before you swap
The most common problem is bent metal pins. Glorious warns that inserting a switch with bent pins can damage the socket. KeebsForAll advises not to force a switch that will not go in, but to remove it and check for bent pins or debris in the socket.
Clipping the plastic pins of a 5-pin switch cannot be undone. Never cut the metal pins, and check the product information first because it may affect warranty terms.
Comparing switch sound with hot-swap
The advantage of hot-swap is trying different switches in the same keyboard. With the case, plate, and keycaps unchanged, it is relatively easier to focus on the switch difference.
Still, a new switch and a well-used one, or a lubed and unlubed one, can sound different even under the same name. When comparing, listen at the same key position, with similar force, and the same recording setup. Switch type differences are covered in linear, tactile, and clicky, and what lube changes in does lubing switches change sound?.
How do you change switches in KeyKey?
In KeyKey, you can also equip and change the switches you collect. The app’s switches are digital collectibles, though, and the sound when you tap the screen and the haptics on supported devices are digital responses designed to match each keycap and switch. It is not a tool for checking physical switch pins, socket compatibility, or how a switch sounds in a real keyboard.
If you want to sort out your sound preferences before buying physical switches, try the KeyKey typing sound samples. If you have not chosen a keyboard size yet, the keyboard sizes comparison can help too.
On the KeyKey homepage, you can try keycaps and sounds you like at a low volume first.
Sources and scope
The Corsair explainer was cited for the difference between hot-swap sockets and soldered boards; the Glorious guide for 3-pin and 5-pin structure, the swap steps, and bent-pin warnings; and the KeebsForAll guide for checking compatibility by hole count and testing after a swap. Each method reflects that product or author’s guidance and is not treated here as a rule for every keyboard. The table and steps organize how to check compatibility; they are not results of durability tests we performed.

